Pull Plow

Two Plows Are Better Than One!

The Daniels Pull Plow doesn't replace your front-mounted plow - it complements it by cleanly removing snow and ice from those hard-to-plow areas that your front mounted plow simply isn't designed to efficiently handle.

PATENTED SPEEDHITCH

Connect the SPEEDHITCH? to the truck for a hook-up that?s fast and easy

INSTALLATION TIME IS CUT IN 1/2

Installation time is cut in half without sacrificing strength or the easy on and off.

2,000 LBS. OF DOWNWARD HYDRAULIC PRESSURE

2,000 lbs. of downward hydraulic pressure, residential driveways, loading dock areas and circle drives are cleared in record time.

FITS VIRTUALLY ANY 4WD VEHICLE

The Daniels Pull Plow fits virtually any 4WD vehicle equipped with a 2? receiver-type hitch.

Thanks to 2,000 lbs. of downward hydraulic pressure, residential driveways, loading dock areas and circle drives are cleared in record time - right down to the pavement! Since your snow removal actions are always done while moving forward, it's much safer than backdragging snow into a crowded, busy street! The Daniels Pull Plow fits virtually any 4WD vehicle equipped with a 2" receiver-type hitch.

Hydraulics: All models

 

    • Pump make: Monarch

 

    • Cycle time: 2.5 seconds

 

    • Oil capacity: 2 qts.

 

    • Fluid type: 1000 wt. auto trans fluid

 

    • Down pressure set at 2,000 lbs.

 

Clearances: All models

 

    • Rear of bumper to end of plow: 26?

 

    • Maximum lift height-side plates: 12?

 

    • Maximum lift height-rear of plow: 18?

 

Recommended Application

 

    • 72? ? 1/2 ton trucks & SUV?s

 

    • 80? ? 1/2 ton trucks

 

    • 90? ? 3/4 and 1 ton trucks

 

    • 96? ? 3/4 and 1 ton trucks (dually)

 

Pull Plow Specifications

Model Number 6202 7202 8002 9002 9602 1022
Plow Width 62"
(5'-2")
72"
(6')
80"
(6'-8")
90"
(7'-6")
96"
(8')
102"
(8'-6")
Overall Dimensions
Weight (lbs.) 250 275 300 325 350 375
Height 19" 19" 19" 19" 19" 19"
Material Specifications
Moldboard 8 gauge 8 gauge 8 gauge 8 gauge 8 gauge 8 gauge
Side plates 3/8" 3/8" 3/8" 3/8" 3/8" 3/8"
Draw bar arms 1" x 2" 1" x 2" 1" x 2" 1" x 2" 1" x 2" 1" x 2"
Cutting Edge - AR400 OR Poly Version Available 3/8" x 5" 3/8" x 5" 3/8" x 5" 3/8" x 5" 3/8" x 5" 3/8" x 5"