Imagine having a Heavy Duty Straight Blade, Wing Plow, and Box Plow mounted on the same loader, all at the same time. No more returning to the shop to swap out plows. No more trying to make a Straight Blade do the work of a Box Plow. You don’t have to imagine any longer because Daniels 3in1 Plow is here! With a flick of a switch, from inside the cab, this fully hydraulic plow transforms from a Straight Blade to a Box Plow, or any shape in between. Each Wing can be controlled separately, and the entire plow hydro turns 35 degrees in either direction, for an unlimited combination of shapes that best match snow and surface conditions. Pros have used the Daniels Wing Plow with Patented Pusher Kit for years to move large quantities of snow quickly. Now they can enjoy the additional benefits of having a Straight Blade and Box Plow built into the same piece of equipment.
Double-acting Angle Cylinders with 35 degree maximum plow angling.
Double-acting Wing Cylinders with 90 degree maximum wing rotation.
Electric three position switch for angling and independent wing pivot control
Electrical quick disconnect fittings to manifold solenoids
Model #3122 has 42″ Height, 12′ Center Board with 5′ Independently pivoting Wings. 22′ Width when straight, Wings adjustable from 1 degree to 90 degrees. Converts to a 12′ Box Plow with 5′ side plates. Leading edge of Wings are tapered and reinforced with an angled shoe for safety when approaching curbs. 3/4″ x 8″ Reversible Steel Cutting Edge. Hydro turn the 3in1 DANIELS Plow 35 degrees left and right in any position.
The Daniels 3in1 Plow utilizes the hydraulics from your loader’s 3rd valve. Connect the loader’s 3rd valve lines to the 3in1 Plow to angle left and right 35 degrees and pivot the wings to the degree needed. Relief is built into the hydraulic manifold to relieve pressure to the 3in1 Plow as it angles when an obstruction is met. Electric switch is supplied with the 3in1 Plow with three positions to control the angling of the Plow and each Wing to any degree independently.
|When Hydro turned|
*In Straight Position
|?14′ 3″||14′ 9″||16′ 5″||18′|
|Moldboard Material||10 Gauge||10 Gauge||10 Gauge||10 Gauge|
|Reinforcement Material||5/16″ Min.||5/16″ Min.||5/16″ Min.||5/16″ Min.|
|Wear Edge||3/4 x 8|
|3/4 x 8|
|3/4 x 8|
|3/4 x 8|
|Recommended Minimum Loader Size (lbs.)||23,000||25,000||28,500||32,000|
*Available with 10′ or 12′ center plow