VersaTach

Easily Cover Multiple Sites

Imagine the convenience and savings of three plows in one!?The VersaTach Plow utilizes the hydraulics from your machine?s 3rd valve. By connecting the 3rd valve lines to the VersaTach, the hydraulic manifold allows the 3-in-1 Plow to angle left and right 35 degrees and pivot the wings to the degree needed.

VersaTach-plow-new-versatach

35 DEGREE PLOW ANGLING

Double-acting Angle Cylinders with 35 degree maximum plow angling.

90 DEGREE WING ROTATION

Double-acting Wing Cylinders with 90 degree maximum wing rotation.

5X CORROSION RESISTANCE

Hydraulic cylinder rods are black nitride treated for 5x corrosion resistance and extreme durability.

COVER MULTIPLE SITES

Drive straight on a trailer to easily cover multiple sites.

The VersaTach Plow utilizes the hydraulics from your machine?s 3rd valve. By connecting the 3rd valve lines to the VersaTach, the hydraulic manifold allows the 3-in-1 Plow to angle left and right 35 degrees and pivot the winds to the degree needed.

Standard Options

  • Leading edges of wings are curved and reinforced with an angled shoe for safety when approaching curbs.
  • Hydroturn the VersaTach Plow 35 degrees left and right in any position.
  • Double-acting Angle Cylinders with 35 degree maximum plow angling.
  • Double-acting Wing Cylinders with 90 degree maximum wing rotation.
  • Hydraulic cylinder rods are black nitride treated for 5x corrosion resistance and extreme durability.
  • Hydraulic Sequencing Manifold with plow angle relief built-in.
  • Preset Pressures on manifold valves.
  • Electric three position switch for angling and independent wing pivot control.
  • Electrical quick disconnect fittings to manifold solenoids.
  • Full Moldboard Trip.
  • Drive straight on a trailer to easily cover multiple sites.

Available Options

  • Standard adjustable skid steer quick connect and loader mount.
  • Skid shoes and curb guards available on request.

VersaTach Plow Specifications

Model Number VT12
Plow Width *In Straight Postion 12.5′
Plow Outside Width *In Box Postion 8′
Center Plow Width 6.5′
Each Wing (when straight, independently pivoting wings adjustable
from 1 degree to 90 degrees)
3′
Inside Box Width 6′
Width When Hydroturned *In Straight Postion 10′
Moldboard Height 27″
Moldboard Material 11 Gauge
Reinforcement Material 1/4″ Min.
Tripping Points 5
Trip Springs 4
Weight (lbs.) 1500
1500 3/4″ x 8″
Minimum Loader Size (lbs.) 6,000